1 and 2 group
CC100
A budget-friendly, highly reliable option distributed extensively by wholesale coffee suppliers.
- PSSR examination
- £265
- With service
- £440
- Boiler
- 5.0 L steam
- Safety valve, if needed
- £35
2 models covered
Conti coffee machine PSSR examinations & servicing
Distributed heavily by wholesale coffee suppliers, so a large installed base across independent specialty and mid-sized groups.
The machine that arrives with the coffee contract.
Models covered
Conti models, with the PSSR rate for each
Every Conti model below has its own page covering the examination scope for that machine's boiler configuration, the typical rate, and the faults we see most often on it.
2 group
Monte Carlo
A traditional machine used by mid-sized independent specialty coffee shops.
- PSSR examination
- £265
- With service
- £440
- Boiler
- 10.0 L steam
- Safety valve, if needed
- £35
Parts on this range
Conti 3/8-inch OEM valve, £15.99 ex VAT.
Part references
Conti part numbers by size
Reference numbers for components that fit Conti machines, with the size that actually distinguishes one from another. Useful when a part is in your hand and the number has worn off, or when two look identical.
| Part | Reference | Size | Fits |
|---|---|---|---|
| Filter basket | #016840 | 1 CUP - 6 gr | 70 - 20.5 |
| Filter basket | #016780 | 2 CUPS - 12 gr | 70 - 21 |
| Filter basket | #016700 | 2 CUPS - 14 gr | 70 - 24.5 |
| Filter basket | #27190 | 2 CUPS - 18 gr | 70 - 28 |
| Filter basket | #227800 | 3 CUPS - 23 gr | 70 - 30 |
| Coffee spout | #407168 | 3/8 | — |
| Group gasket | #002710 | 72x56x8.5 | EXT. CUTS - SPACCHI EST. TWIN STAR2 |
| Group gasket | #2700 | 72x56x9 | EXT. CUTS - SPACCHI EST. CLUB - XEOS2 |
| Flowmeter | #403466V | 9.0.78.02G / ø 1/4"FF / ø 1.15 mm | SK2 |
| Shower screen | #072200 | ø 57.0 mm | CLASSICA |
| Shower screen | #355900 | ø 58.5 mm | CLASSICA - CLUB - XEOS2 - TWINSTAR 2 |
Numbers as published in supplier catalogues. A reference to identify a part by, not a claim that we hold it in stock.
Questions
Conti questions, answered
Not sure which model you have? The make and model are on the boiler plate — send us a photo and we will identify it.
0208 037 9340
Do you examine Conti machines?
Yes — Conti is one of the ranges our engineers cover nationwide. Distributed heavily by wholesale coffee suppliers, so a large installed base across independent specialty and mid-sized groups.
What does a Conti PSSR examination cost?
Across the 2 Conti models we cover, a standalone examination runs from £all priced at the same rate + VAT. Every one of the 2 models we cover here carries a single steam boiler, so the examination comes down to one pressure vessel and one set of protective devices. The machine that arrives with the coffee contract. Rates are published rather than quoted on application — call 0208 037 9340 with the model and postcode and you will have the exact figure on the call.
Which Conti models do you cover?
2 of them: CC100, Monte Carlo. Their group configurations run 1 and 2 group and 2 group. Each model has its own page setting out the examination scope for that machine's boiler layout and the rate it carries.
One call prices any Conti.
Tell us the model, the group count and the postcode — you will have a fixed figure and a date before you hang up.