bean to cup
E2
The larger of the two E2 variants, with a bigger sealed boiler than the E2m and a 3.1 bar design rating.
- PSSR examination
- £265
- With service
- £645
- Boiler
- 5.4 L steam
- Safety valve, if needed
- Quoted
4 models covered
Eversys coffee machine PSSR examinations & servicing
Swiss automatics with sealed stainless boilers running at higher pressure than any traditional machine we cover.
Swiss-built automatics that use sealed stainless steel boilers at internal pressures well above a traditional espresso machine — the E4 works at around 1.8 bar where a La Cimbali M39 sits at 1.3. That changes what the examination looks like; it does not change whether one is needed.
Models covered
Eversys models, with the PSSR rate for each
Every Eversys model below has its own page covering the examination scope for that machine's boiler configuration, the typical rate, and the faults we see most often on it.
bean to cup
E2m
The most common Eversys in our records. A sealed steel boiler at a 3.3 bar design rating, and a working pressure of 1.5 bar — higher than anything traditional here.
- PSSR examination
- £265
- With service
- £645
- Boiler
- 5.6 L steam
- Safety valve, if needed
- Quoted
bean to cup
E4
The four-group Eversys, and the highest working pressure in our records at 1.8 bar.
- PSSR examination
- £265
- With service
- £645
- Boiler
- 5.4 L steam
- Safety valve, if needed
- Quoted
bean to cup
E4m
The slimmed E4, sharing its 5.6 litre sealed boiler with the E2m but running the larger brew platform.
- PSSR examination
- £265
- With service
- £645
- Boiler
- 5.6 L steam
- Safety valve, if needed
- Quoted
Parts on this range
Eversys do not sell the safety valve as a valve. The official kit 102 412/A is three wearable parts — O-ring, spring and plunger — and the valve body sits inside the proprietary steam module. Parts are dealer-supplied and quoted per machine; Eversys publish no UK parts prices.
Technical library
We hold 18 manuals and technical documents, 14 parts diagrams for Eversys — 48 files in all. That is what lets us answer a question about a specific model rather than guess at it. Ask us for a section and we will send it.
Questions
Eversys questions, answered
Not sure which model you have? The make and model are on the boiler plate — send us a photo and we will identify it.
0208 037 9340
Do you examine Eversys machines?
Yes — Eversys is one of the ranges our engineers cover nationwide. Swiss automatics with sealed stainless boilers running at higher pressure than any traditional machine we cover.
What does a Eversys PSSR examination cost?
Across the 4 Eversys models we cover, a standalone examination runs from £all priced at the same rate + VAT. Every one of the 4 models we cover here carries a single steam boiler, so the examination comes down to one pressure vessel and one set of protective devices. Swiss-built automatics that use sealed stainless steel boilers at internal pressures well above a traditional espresso machine — the E4 works at around 1.8 bar where a La Cimbali M39 sits at 1.3. That changes what the examination looks like; it does not change whether one is needed. Rates are published rather than quoted on application — call 0208 037 9340 with the model and postcode and you will have the exact figure on the call.
Which Eversys models do you cover?
4 of them: E2, E2m, E4, E4m. Their group configurations run bean to cup. Each model has its own page setting out the examination scope for that machine's boiler layout and the rate it carries.
One call prices any Eversys.
Tell us the model, the group count and the postcode — you will have a fixed figure and a date before you hang up.